Dorman 570-006 Rubber Expansion Plug 1-1/8 In. - Size Range 1-1/8 In. - 1-1/4 In, 5 Pack Universal Fit

Product Information

I.D. Hole Size: 2.920" [74.168 mm] to 3.241" [82.326 mm], Max Air Pressure: Up to 5 PSI, Hardware: brass handle with zinc-plated steel body, Rubber: Neoprene I.D. Hole Size: 0.937" [23.800 mm] to 1.031" [26.180 mm], Max Air Pressure: Up to 10 PSI, Hardware: brass handle with zinc-plated steel body, Rubber: Neoprene Specially designed to temporarily seal and stop off metallic or PE pipe remotely for fitting renewal or service line maintenance.Reusable, rugged, and lightweight made from Nitrile rubber and plated steel available in 1/2"-2” sizes.Also used as a tamper resistant night cap to prevent unwanted material such as dirt, water, debris, animals, etc. from entering open ended pipes. This is critically important when protecting your expensive pipeline projects.These pipe plugs are composed of two steel washers, which are compressed together by tightening the central bolt using the Special Expansion Plug Wrench. I.D. Hole Size: 1.630" [41.40 mm] to 1.793" [45.54 mm], Max Air Pressure: Up to 5 PSI, Hardware: ALL Stainless Steel, Rubber: Neoprene I.D. Hole Size: 2.630" [66.802 mm] to 2.919" [74.150 mm], Max Air Pressure: Up to 5 PSI, Hardware: brass handle with zinc-plated steel body, Rubber: Neoprene

I.D. Hole Size: 1.440" [36.576 mm] to 1.584" [40.234 mm], Max Air Pressure: Up to 10 PSI, Hardware: brass handle with zinc-plated steel body, Rubber: Neoprene I.D. Hole Size: 1.810" [45.974 mm] to 1.991" [50.571 mm], Max Air Pressure: Up to 5 PSI, Hardware: brass handle with zinc-plated steel body, Rubber: Neoprene I.D. Hole Size: 1.440" [36.576 mm] to 1.584" [40.234 mm], Max Air Pressure: Up to 10 PSI, Hardware: ALL Stainless Steel, Rubber: Neoprene I.D. Hole Size: 3.690" [93.726 mm] to 4.096" [104.036 mm], Max Air Pressure: Up to 5 PSI, Hardware: brass handle with zinc-plated steel body, Rubber: NeopreneExpansion seals or expansion joints as they are also known, provide a subtle yet crucial function in a wide variety of construction applications. The key purpose of an expansion seal is to provide a flexible connection point between two concrete, cement or similar structures. We specifically manufacture our TPE expansion seal profiles to provide excellent abrasion as well as impact resistance. This enables our expansion seals to provide a superior life expectancy compared to similar alternatives. I.D. Hole Size: 1.320" [33.528 mm] to 1.452" [36.881 mm], Max Air Pressure: Up to 10 PSI, Hardware: brass handle with zinc-plated steel body, Rubber: Neoprene I.D. Hole Size: 2.470" [62.74 mm] to 2.742" [69.64 mm], Max Air Pressure: Up to 5 PSI, Hardware: brass handle with zinc-plated steel body, Rubber: Buna-Nitrile I.D. Hole Size: 0.812" [20.625 mm] to 0.893" [22.687 mm], Max Air Pressure: Up to 10 PSI, Hardware: brass handle with zinc-plated steel body, Rubber: Neoprene

The term freeze or frost plug is slang; the correct name of the press-in plugs is actually 'core plug'. It I.D. Hole Size: 1.550" [39.370 mm] to 1.705" [43.307 mm], Max Air Pressure: Up to 10 PSI, Hardware: ALL Stainless Steel, Rubber: Neoprene I.D. Hole Size: 0.719" [18.263 mm] to 0.791" [20.089 mm], Max Air Pressure: Up to 10 PSI, Hardware: brass handle with stainless steel body, Rubber: Neoprene I.D. Hole Size: 2.310" [58.67 mm] to 2.564" [65.13 mm], Max Air Pressure: Up to 5 PSI, Hardware: brass handle with zinc-plated steel body, Rubber: Neoprene I.D. Hole Size: 0.719" [18.26 mm] to 0.791" [20.09 mm], Max Air Pressure: Up to 10 PSI, Hardware: brass handle with zinc-plated steel body, Rubber: Neoprene

Sort By

I.D. Hole Size: 1.700" [43.180 mm] to 1.870" [47.498 mm], Max Air Pressure: Up to 5 PSI, Hardware: brass handle with zinc-plated steel body, Rubber: Neoprene I.D. Hole Size: 1.210" [30.734 mm] to 1.331" [33.807 mm], Max Air Pressure: Up to 10 PSI, Hardware: brass handle with zinc-plated steel body, Rubber: Neoprene We offer a return period on all of our products to give you peace of mind, to view our policies and There are different types of plugs on the market. The plugs are usually thin metal cups press fitted into the casting holes, but may be made of rubber or other materials. In some high-performance engines the plugs are large diameter cast metal threaded pipe plugs. The image above is commonly known as a pipe, or hex plug. These are used in varying degrees of engineering projects.

I.D. Hole Size: 1.380" [35.05 mm] to 1.518" [38.56 mm], Max Air Pressure: Up to 5 PSI, Hardware: brass handle with zinc-plated steel body, Rubber: Neoprene I.D. Hole Size: 2.920" [74.168 mm] to 3.241" [82.326 mm], Max Air Pressure: Up to 5 PSI, Hardware: ALL Stainless Steel, Rubber: Neoprene I.D. Hole Size: 0.937" [23.80 mm] to 1.03" [26.18 mm], Max Air Pressure: Up to 10 PSI, Hardware: brass handle with zinc-plated steel body, Rubber: Neoprene I.D. Hole Size: 1.630" [41.40 mm] to 1.793" [45.54 mm], Max Air Pressure: Up to 5 PSI, Hardware: brass handle with zinc-plated steel body, Rubber: Neoprene I.D. Hole Size: 1.920" [49.022 mm] to 2.142" [54.414 mm], Max Air Pressure: Up to 5 PSI, Hardware: brass handle with zinc-plated steel body, Rubber: NeopreneI.D. Hole Size: 2.060" [52.234 mm] to 2.287" [58.080 mm], Max Air Pressure: Up to 5 PSI, Hardware: brass handle with zinc-plated steel body, Rubber: Neoprene There are different types of plugs on the market. The plugs are usually thin metal cups press fitted into the casting holes, but may be made of rubber or other materials. In These Plugs and Stoppers are useful for all kinds of fabricating, sealing, finishing and masking uses within consumer and industrial related industries. Our rangeof Plugs and Stoppers has been produced with efficiency in mind, each having their own unique uses and characteristics. I.D. Hole Size: 1.920" [49.022 mm] to 2.142" [54.414 mm], Max Air Pressure: Up to 5 PSI, Hardware: ALL Stainless Steel, Rubber: Neoprene

I.D. Hole Size: 0.468" [11.89 mm] to 0.515" [13.08 mm], Max Air Pressure: Up to 10 PSI, Hardware: brass handle with zinc-plated steel body At least some of the " numbered" (1, 2, 3) Permatex are non-hardening, so when the tube leaked 10 years ago and made a mess it is still a smeary mess today. I.D. Hole Size: 2.300" [58.420 mm] to 2.553" [64.846 mm], Max Air Pressure: Up to 5 PSI, Hardware: brass handle with zinc-plated steel body, Rubber: Neoprene I.D. Hole Size: 1.190" [30.23 mm] to 1.309" [33.25 mm], Max Air Pressure: Up to 5 PSI, Hardware: brass handle with zinc-plated steel body, Rubber: NeopreneThe Welch plug, (misnomer: Welsh plug), is a thin, domed disc or dish, of a metallic alloy, which is pressed, convex side out, into a casting hole and against an internal shoulder. Alternatively a non-ferrous metal such as I.D. Hole Size: 0.850" [21.59 mm] to 0.935" [23.75 mm], Max Air Pressure: Up to 10 PSI, Hardware: brass handle with zinc-plated steel body, Rubber: Neoprene I.D. Hole Size: 2.220" [56.388 mm] to 2.464" [62.591 mm], Max Air Pressure: Up to 5 PSI, Hardware: brass handle with zinc-plated steel body, Rubber: Neoprene I.D. Hole Size: 2.440" [61.976 mm] to 2.708" [68.973 mm], Max Air Pressure: Up to 5 PSI, Hardware: brass handle with zinc-plated steel body, Rubber: Neoprene