PINTIME Luxury Mens/Womens Unisex Diamond Watch Bling Iced-Out Watch Oblong Wristwatch Crystal Quartz Watch

Product Information

So, are Pintime watches really worth it? All things considered, you are looking at a watch that definitely doesn’t hold to the highest of quality standards. For what they are though, and for such a low price, they aren’t bad really. I can’t complain.

The iPhone 15 lets you use reverse charging to charge AirPods and small devices — here's how it works You then want to insert the pin pusher over the pin for the relevant number of links you want to remove — remember, you want to remove half on each side of the clasp. Then, using the included hammer (a regular hammer can also work if you’re careful), lightly tap the pin pusher until you can’t push it any further into the link. Rotate your watch and pull the pin loose from the other side using a pair of pliers of your fingers. Be ready for the links to fall free and watch out for ferrules falling loose too. Don’t lose the pins or ferrules — keep them to hand on a tray. We accept all cards : Visa, Mastercard, American Express, Discover, JCB, Diners Club, UnionPay, Maestro. If all you want is a watch that has that iced out, bust down look, and don’t want to spend much money, then Pintime watches are going to be a good choice. They do possess that look, and at dirt cheap prices for that matter. All in all, Pintime watches are not a bad choice when it comes to budget bling. Put the SPI flash in deep power-down mode by setting flash CS high, then low, then writing the byte 0xb9 on the SPI bus, and then setting flash CS high again.If you want to dive in to the ecosystem, here's a short list of various articles and blog posts that can help you set up your soft- or hardware development environment. Pintime watches present true bargain bin pricing. These watches really are dirt cheap, especially compared to other similarly styled brands. And that’s it, your watch strap should now fit you perfectly. Remember to keep the spare links and pins in case you should ever need them in the future. SLEEP (reset the touchpanel using the reset pin before using this register: pin_low, delay 5ms, pin_high, delay 50ms then write 3 to register 0xA5) Put the heart rate sensor in sleep mode by setting the PDRIVER (0x0C) register to 0, see the HRS3300 datasheet for details.

So, now that we’ve seen what Pintime watches are all about, you may be interested in purchasing one. In that case, we do have a couple of recommendations! Reading the battery voltage is a bit harder. For that you can use the battery voltage pin on P0.31 (AIN7). The returned value is 12 bits, which means it is 0..4095. You can get the measured voltage with the following formula, assuming a reference voltage of 3.3V (this is configurable in the ADC):

While enabled, the button in pin (P0.13) will be high when the button is pressed, and low when it is not pressed. The on board accelerometer in devices shipped before July 2021 is a Bosch BMA421, connected to the I2C bus. Versatile Style: This watch seamlessly combines fashion, sport, and business elements, making it suitable for various occasions and outfits. Fashionable and casual design:This watch has a stylish and versatile design that makes it perfect for everyday wear. There is not a whole lot amazing going on with these builds. Clearly, these are not, by any means high end watches. they are decent, however, for being such low priced timepieces.

The display is driven using the ST7789 display controller. Use the following pins to drive the screen: The bands are made of stainless steel. These watches are not water resistant either, so keep them from getting wet if at all possible. While this brand does offer a few other styles, we are going to be focusing on their iced out watches. These are the styles that are most popular among Pintime watches. It’s easy to see why.

The PineTime uses a standard 20mm watch band / strap. There is a thread in the forum discussing this. Chip select must be held low while driving the display. It must be high when using other SPI devices on the same bus (such as external flash storage) so that the display controller won't respond to the wrong commands. InfiniLink (iOS) - Companion mobile app in development. Supports updating firmware/bootloader, setting date and time, Apple Music controls, and battery and heart rate data. NOTE: The controller goes to sleep when no event is detected. In sleep mode, the controller does not communicate on the I²C bus (it appears disconnected). So, for the communication to work, you need to tap on the screen so that the chip wakes-up. Touch information is available from the 63 first registers of the controller. Remember: the device is in sleep mode when no touch event is detected. It means that you can read the register only when the touch controller detected an event. You can use the Interrupt pin to detect such event in the software.

But we’re not here to talk about that today. Instead, we are here to talk about this super cheap brand that does not contain any real diamonds yet has the same style of a bust down watch. In terms of style, these do hit the mark, and they do present the look that they are going for. Just don’t be surprised if they give away their real value upon closer inspection. PineTime/InfiniTime needs a companion app to e.g. upload a firmware, get notifications from a phone, or just get the date/time. Enable the DC/DC regulator. This doesn't affect the current consumption while sleeping, but almost halves the runtime current consumption.

🍪 Privacy & Transparency

Luxurious and sporty design: The watch has a unique and eye-catching appearance with a diamond CZ embedded in the dial. It is perfect for everyday wear and can withstand splashes and brief immersion in water.