DrayTek Vigor167 modem 30000 Kbit/s

Product Information

or any of Draytek's devices on that network) (unless something really screwy on your configs but, out of the box, ANY pair of routers will behave like this. I am using the same DNS, same router (vigor just set up as a bridge modem, same as the old TP-Link). Anyway the DSL light doesn't light up and the upstream/downstream info under the DSL connection stats is empty.

Modems - DrayTek Vigor Modems - DrayTek Vigor

Seems to be a rev-up of existing Vigor 165 - with some indication that the Vigor 165 will be replaced in the lineup. If you have connected your dial-up router via LAN port 1, for example, you can still access our modem via LAN port 2, for example to monitor status information. These steps need to be completed before 2021-05-22 or the WCF and DrayDDNS services may not work as expected.Firmware is normally supplied in two different styles: The ALL file will just upgrade the firmware, whereas the RST file will upgrade the firmware and wipe all settings back to factory defaults. My FTTN connection is terrible so even if there's a slight chance of an improvement in stability/speeds by upgrading the fw. The built-in DSL modem is backward compatible with the ADSL2+ connection and delivers download speed up to 300 Mbps through the Supervectoring 35b technology.

Vigor167 35b Modem Quick Start Guide - DrayTek

As well as all the benefits of the Vigor 130, the Vigor 166 also offers BT Ultrafast Fibre and an additional LAN port. It should also be noted that with regard to ADSL, both the variants Annex-A and Annex-B are combined in one device for the first time, which also further increases the possibilities for using the modem. DrayTek does not have documentation on what the differences are between modem codes since these are provided as drivers by the chipset manufacturers to be incorporated into the firmware. As it happens, after quite a few weeks of perfect behaviour since it was installed, I came home today to find mine in this state :-(. If your end device does not support VLAN tagging, our Vigor167 modem also compensates for this and can do the tagging for you.I like the idea of squeezing more speed, although at 1,100m from my node there probably isn't much I can do anyway. Well knock me down, the light went green – still no Internet though and I suspect this modem is toast, had issues before I left last time with it not passing layer 3. Hi the MTU is set at 1520 on the modem but because the router (a tplink vr2800) will not do 1500 ive set it to 1492 which appiers to be the max it supports.